energy saving liquid nitrogen pump co2 supplier for natural gas boosts pressure

latest_products

Instructions de pompe à essai de pression manuelle

Pompe à essai de pression hydraulique / hydromique / hydrostatique

Cylindre à gaz Machine d'essai de mesure externe avec vestes d'eau

Pompe d'injection de réactif chimique pneumatique

Information produit
retour d'information

Company Advantages
1. Suncenter co2 filling pump is the outcome of integrated knowledge. It is designed under the knowledge of the photosynthesis, photoelectric chemistry, and photodecomposition reaction. There is no heat generated during liquid transfer
2. Quality assurance system is established to ensure the quality of liquid nitrogen pump . This product has the characteristics of explosion proof
3. The product has reached the domestic advanced level and contributed to the international trade. Its output pressure can be easily adjustable
4. As we put great importance on the quality management system, the quality of the product is fully guaranteed to meet the international standards. It has the capability of ultimate pressure, flow output horsepower

Air Driven Liquid CO2 Booster Pump-DGG/DGGD Series.

SUNCENTER pumps are air driven at a drive air pressure of 2bar to 8bar by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.

Suncenter pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios， while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal outlet pressure can be calculated.

Suncenter energy saving liquid nitrogen pump supplier for natural gas boosts pressure-1

DGG Series Liquid CO2 Booster Pumps(Single acting)

Suncenter energy saving liquid nitrogen pump supplier for natural gas boosts pressure-2

◪ DGG Series Liquid CO2 Booster Pumps(Single acting)  

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)
DGG6	6:1	2-8 bar	6XPL	48	NPT1/2	NPT1/2	29.91
DGG10	10:1	2-8 bar	10XPL	80	NPT1/2	NPT1/2	18.84
DGG16	16:1	2-8 bar	16XPL	128	NPT1/2	NPT1/2	12.42
DGG28	28:1	2-8 bar	28XPL	224	NPT1/2	NPT1/2	7.11
DGG40	40:1	2-8 bar	40XPL	320	NPT1/2	NPT1/2	4.89
DGG64	64:1	2-8 bar	64XPL	512	NPT1/2	NPT3/8	3.08
DGG80	80:1	2-8 bar	80XPL	640	NPT1/2	NPT3/8	2.44
DGG100	100:1	2-8 bar	100XPL	800	NPT1/2	NPT3/8	1.92
DGG130	130:1	2-8 bar	130XPL	1040	NPT1/2	M14X1.5	1.47
DGG175	175:1	2-8 bar	175XPL	1400	NPT3/8	M14X1.5	1.14

DGGD Series Liquid CO2 Pumps(Double acting)

Suncenter energy saving liquid nitrogen pump supplier for natural gas boosts pressure-3

◪ DGGD Series Liquid CO2 Pumps(Double acting) 

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)**
DGGD4	4:1	2-8 bar	4XPL	32	NPT1/2	NPT1/2	70.00
DGGD6	6:1	2-8 bar	6XPL	48	NPT1/2	NPT1/2	48.60
DGGD10	10:1	2-8 bar	10XPL	80	NPT1/2	NPT1/2	30.61
DGGD16	16:1	2-8 bar	16XPL	128	NPT1/2	NPT1/2	19.73
DGGD28	28:1	2-8 bar	28XPL	224	NPT1/2	NPT1/2	11.30
DGGD40	40:1	2-8 bar	40XPL	320	NPT1/2	NPT3/8	7.69
DGGD64	64:1	2-8 bar	64XPL	512	NPT1/2	NPT3/8	4.94
DGGD80	80:1	2-8 bar	80XPL	640	NPT1/2	NPT3/8	3.96
DGGD100	100:1	2-8 bar	100XPL	800	NPT1/2	NPT3/8	3.13
DGGD130	130:1	2-8 bar	130XPL	1040	NPT1/2	M14*1.5	2.40
DGGD175	175:1	2-8 bar	175XPL	1400	NPT3/8	M14*1.5	1.81

Suncenter energy saving liquid nitrogen pump supplier for natural gas boosts pressure-4

◪ Liquid carbon dioxide booster pump and pressurization equipment, commonly used in carbon dioxide supercritical extraction of various plant extracts, material foaming, and carbon dioxide fire extinguisher filling. Among them, carbon dioxide extraction is often used in biopharmaceuticals. Experimental research works by using a special pump for liquid carbon dioxide to pressurize carbon dioxide to a supercritical state, which is used to decompose various elements in plants for easy extraction.

DGGD series liquid CO2 pump working picture

Suncenter energy saving liquid nitrogen pump supplier for natural gas boosts pressure-5

◪ DGGD series liquid CO2 pump working picture

features

※ Compressed Air driven - no electricity required (connect to normal air compressor)
※ In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
※ No airline lubricator required
※ Wide range of models with different ratios
※ Built-in-cooling on most models
※ Easy to install, operate and maintain
※ Best price / performance ratio
※ No heat, flame or spark risk and explosion proof 
※ Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter pump will automatically start, keep the loop pressure constant 
※ Applicable for liquid CO2/liquid+gas mixed CO2/Supercritical CO2
※ For liquid CO2 cylinder transfer/filling
※ For CO2 Fire Extinguisher filling 
※ For Supercritical CO2 extraction

video

Company Features
1. Suncenter has been devoting to offering the most professional support and best quality liquid nitrogen pump for clients. Dongguan Suncenter Fluid Control Equipment Co., Ltd dedicates ourselves to combining the advantages of enormous local human resources and our advanced technologies.
2. Dongguan Suncenter Fluid Control Equipment Co., Ltd strictly control the quality of raw material to make sure quality assurance of co2 pump .
3. Dongguan Suncenter Fluid Control Equipment Co., Ltd has a number of top R&D and design teams for booster pump system. By improving management idea and plan, Suncenter will constantly upgrade the work efficiency. Get info!

z******i

The manufacturing process of Suncenter co2 pump includes profiles extruding, cutting, CNC machining, deburring, and surface treating. All of these procedures have to be inspected by the QC team to meet the highest requirements in the heat sink industry.

j******e

Suncenter co2 pump is designed and optimized exclusively. Many factors which affect its performance such as materials, air circulation parts, housing finish are all considered during its design.

r******s

The law of heat conduction theory has been adopted in the developing of Suncenter booster pump system. It's specially made to allow the heat to be transferred from the higher temperature region to the lower temperature region.

h******d

The design of Suncenter co2 filling pump is the outcome of a professional thermal solution. Influencing factors such as air velocity, choice of dissipation materials, and finish are taken into consideration by the designers.

j******y

In order to meet the standards of the heatsink industry, Suncenter co2 filling pump has to go through a strict inspection process conducted by precise inspection equipment.

n******k

The product has excellent mechanical strength and loading capacity. It is treated with die-casting under high-temperature and high-pressure conditions, therefore its structure is firm and tough.

Message du produit

*Nom

Téléphone

*Courriel

*Contenu