newly fire extinguisher refill extinguisher bulk production for fire extinguisher

latest_products

Instructions de pompe à essai de pression manuelle

Pompe à essai de pression hydraulique / hydromique / hydrostatique

Cylindre à gaz Machine d'essai de mesure externe avec vestes d'eau

Pompe d'injection de réactif chimique pneumatique

Information produit
retour d'information

DGS-FM-5A model automatic FM200 filling machine

Solution A (DGS-FM-5A) added the sensors, electromagnetic valve, vacuum pump, and the electronic scale based on solution B (manual control),it is automatic control mode

Suncenter newly fire extinguisher refill bulk production for fire extinguisher-1

◪ Main parameters:
◪ The driving source: compressed air (by air compressor, need 3-8 bar air pressure)
◪ Medium: FM200/ NOVEC/Nitrogen
◪ Boost ratio: 5:1
◪ Output pressure: 4.2 Mpa/5.3Mpa
◪ Driven air inlet port: fast insert 12 per cent
◪ Nitrogen/FM200 inlet port: ZG3/8 internal thread
◪ High pressure gas outlet port: ZG3/8 internal thread
◪ Electric scale range:0-500kg（there is also max 1000kg for optional）

DGS-DGGD16 model liquid CO2 filling equipment

Suncenter newly fire extinguisher refill bulk production for fire extinguisher-2

◪ The CO2 Fire Extinguisher filling equipment including following parts:
◪ Air–driven liquid CO2 gas booster pump
◪ Stainless steel material cabinet
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge
◪ Gas inlet switch, Gas inlet pressure gauge
◪ Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’special requirement.

Model	Pressure Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Driven air inlet port	High pressure Outlet port	MAX Flow (L/min)**
DGS-DGG16	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	12.42
DGS-DGG28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	7.11
DGS-DGGD166	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	19.73
DGS-DGGD28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	11.30

DGS-CO2-B model liquid CO2（fire extinguisher） filling machine

Suncenter newly fire extinguisher refill bulk production for fire extinguisher-3

◪ Main parameters:
◪ The driving source: compressed air (by air compressor, need 3-8 bar air pressure)
◪ Medium: CO2
◪ Max output pressure: 12.8Mpa
◪ Driven air inlet port: fast insert 12 per cent
◪ Liquid CO2 inlet port: ZG3/8 internal thread
◪ High pressure gas outlet port: ZG3/8 internal thread

Fire Extinguisher filling

Suncenter newly fire extinguisher refill bulk production for fire extinguisher-4

Suncenter newly fire extinguisher refill bulk production for fire extinguisher-5

video

s******y

fire extinguisher refill is designed as fire extinguisher refilling machine and it provides fire extinguisher refilling machine solution. It provides surface protection on goods, preventing wear and reducing scratch

y******v

The unique fire extinguisher refilling machine material of fire extinguisher refill makes it a fire extinguisher refilling machine. It is of weather resistance, allowing it to be used against long exposure to the environment

e******w

Materials of fire extinguisher refilling machine is actually quite fire extinguisher refilling machine. It has good electrical insulation and low thermal resistance

r******l

fire extinguisher refill tend to be fire extinguisher refill than other brands. It is of weather resistance, allowing it to be used against long exposure to the environment

e******t

No other similar fire extinguisher refilling machine has been able to equal its fire extinguisher refill. It has good flexibility and features excellent impact resistance

y******i

It continuously set and then exceed the standard for what it should be. It is made of hard adhesives that are not easy to squeeze out

Message du produit

*Nom

Téléphone

*Courriel

*Contenu

Suncenter newly fire extinguisher refill bulk production for fire extinguisher