scientific fire extinguisher refill extinguisher for fire extinguisher

latest_products

Instructions de pompe à essai de pression manuelle

Pompe à essai de pression hydraulique / hydromique / hydrostatique

Cylindre à gaz Machine d'essai de mesure externe avec vestes d'eau

Pompe d'injection de réactif chimique pneumatique

Information produit
retour d'information

DGS-FM-5A model automatic FM200 filling machine

Solution A (DGS-FM-5A) added the sensors, electromagnetic valve, vacuum pump, and the electronic scale based on solution B (manual control),it is automatic control mode

scientific fire extinguisher refill extinguisher for fire extinguisher-1

◪ Main parameters:
◪ The driving source: compressed air (by air compressor, need 3-8 bar air pressure)
◪ Medium: FM200/ NOVEC/Nitrogen
◪ Boost ratio: 5:1
◪ Output pressure: 4.2 Mpa/5.3Mpa
◪ Driven air inlet port: fast insert 12 per cent
◪ Nitrogen/FM200 inlet port: ZG3/8 internal thread
◪ High pressure gas outlet port: ZG3/8 internal thread
◪ Electric scale range:0-500kg（there is also max 1000kg for optional）

DGS-DGGD16 model liquid CO2 filling equipment

scientific fire extinguisher refill extinguisher for fire extinguisher-2

◪ The CO2 Fire Extinguisher filling equipment including following parts:
◪ Air–driven liquid CO2 gas booster pump
◪ Stainless steel material cabinet
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge
◪ Gas inlet switch, Gas inlet pressure gauge
◪ Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’special requirement.

Model	Pressure Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Driven air inlet port	High pressure Outlet port	MAX Flow (L/min)**
DGS-DGG16	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	12.42
DGS-DGG28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	7.11
DGS-DGGD166	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	19.73
DGS-DGGD28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	11.30

DGS-CO2-B model liquid CO2（fire extinguisher） filling machine

scientific fire extinguisher refill extinguisher for fire extinguisher-3

◪ Main parameters:
◪ The driving source: compressed air (by air compressor, need 3-8 bar air pressure)
◪ Medium: CO2
◪ Max output pressure: 12.8Mpa
◪ Driven air inlet port: fast insert 12 per cent
◪ Liquid CO2 inlet port: ZG3/8 internal thread
◪ High pressure gas outlet port: ZG3/8 internal thread

Fire Extinguisher filling

scientific fire extinguisher refill extinguisher for fire extinguisher-4

scientific fire extinguisher refill extinguisher for fire extinguisher-5

video

t******z

The quality of Suncenter fire extinguisher refilling machine is under good control.

i******b

Suncenter fire extinguisher refill is manufactured from a well-equipped workshop and manufactured by using the state-of-the-art technology.

n******o

Suncenter fire extinguisher refill is manufactured as per the set industry standards.

u******i

The adoption of advanced technology gives Suncenter fire extinguisher refill a good surface finish.

t******l

Many of the materials we use for this Suncenter fire extinguisher refilling machine are highly-certified.

b******m

Its comprehensive cost is much lower than that of common fire extinguisher refilling machine.

Message du produit

*Nom

Téléphone

*Courriel

*Contenu

Scientific fire extinguisher refill extinguisher for fire extinguisher