high-energy valve test bench test for factory

latest_products

Instructions de pompe à essai de pression manuelle

Pompe à essai de pression hydraulique / hydromique / hydrostatique

Cylindre à gaz Machine d'essai de mesure externe avec vestes d'eau

Pompe d'injection de réactif chimique pneumatique

Information produit
retour d'information

Product Comparison

booster pumps in Suncenter Fluid Control Equipment has the following advantages, compared with same kind of products in the market.

Company Advantages
1. We adopt mature technology to produce Suncenter hydrostatic pressure test equipment. Technologies, such as mercerization, which is usually used in the high-end textile products industry has been used.
2. The product is well-known for its mold and bacteria resistance. It has an anti-germ layer that features a high antibacterial level.
3. Dongguan Suncenter Fluid Control Equipment Co., Ltd has a sound management system to ensure product quality and the interests of consumers.
4. Suncenter Fluid Control Equipment has enforced the brand operation thoroughly.

Introduction

Suncenter test valve test bench for factory-1

◪ The safety valve test bench is a new type of pressure test device developed by our company for reference to GB/T 12242-2005 (pressure release device and performance test specification), which is used to adjust and test the setting pressure of the safety valve.

Function and features

Safety valve test bench is used for various safety valve setting pressure adjustment, the whole set pressure detection, discharge pressure detection, back seat pressure testing, assessment of its pressure safety performance etc.. ,

◪ A. pressure range: 0-480 bar for option(gas pressure and water pressure)
◪ B. test medium: air, nitrogen, water;
◪ C. test valve diameter: DN15-DN400 for option
◪ D. pressure control accuracy: less than 1%F.S;
◪ E. pressure measurement accuracy: 0.4 pressure gauge (optional higher pressure level);

◪ F. Clamping way: hydraulic cylinder clamping;
◪ G. station interface type: screw and flange type
◪ H. clamping force output range: 0-50 tons;
◪ I. supply voltage: 50Hz -60Hz ,220V/380V for option
◪ J.Size：1500×1200×900mm(machine) +1500×800×800mm(clamping device)

Control panel

Suncenter test valve test bench for factory-2

Clamping seat

Suncenter test valve test bench for factory-3

Schematic diagram

Suncenter test valve test bench for factory-4

Instruction for software control part

Suncenter test valve test bench for factory-5

◪ Figure 1
◪ The first step: start the computer and double click the boot program, as shown in Figure 1.
◪ The second step: after the program, enter the main interface of the program.

Suncenter test valve test bench for factory-6

◪ In the main interface, select the appropriate sensor, and pay attention to the selection of the sensor not to exceed the 2/3. of the measuring process ,as shown in Figure3

Suncenter test valve test bench for factory-7

◪ In the main interface, choose water pressure test or air pressure test. As shown in Figure 4.

Suncenter test valve test bench for factory-8

◪ After selecting the pressure or water pressure test, click the menu bar test information to set the options. As shown in Figure 5.

Suncenter test valve test bench for factory-9

◪ Display the dialog box for the test information, as shown in Figure6

With printer,could print the testing report directly.

Suncenter test valve test bench for factory-10

Suncenter test valve test bench for factory-11

Suncenter test valve test bench for factory-12

◪ Safety valve test bench SVT40-DN400-CC computer control model

video

Company Features
1. Dongguan Suncenter Fluid Control Equipment Co., Ltd has been focused on valve test bench design, construction and service for decades.
2. We’ve worked with folks here and with countless companies across China (and beyond). By stressing the importance of a true relationship with each customer to ensure that we thoroughly understand all aspects of their business, we obtain many repeat purchases.
3. We put emphasis on sustainability. We have constantly optimized the collection of production waste so we can use a source of new resources. We hope and strive to provide customers with high-quality products and whole-hearted service, and we will try hard to achieve the goal of developing and expanding our enterprise through scientific and technological innovation and creative thinking. Get info! We will actively foster sustainable practices. We'll conduct production and business activities in an environmentally and socially responsible manner that generates little carbon footprint. Sustainability is a core element of our company. In our supply chain, we do our best to reduce the footprint and attempt circular solutions.

m******t

Before delivery, Suncenter valve test bench has to undergo a wide range of tests. It is strictly tested in terms of the strength of its materials, statics&dynamics performance, resistance to vibrations&fatigue, etc. It can be easily put in a corner without taking up too much space

g******v

Suncenter hydrostatic pressure test equipment has been tested according to the general standards. It is tested in terms of functionality, strength, stiffness, wears, and corrosion. Without the capacity need for ribbons and ink, its design is more compact

b******g

Suncenter valve test bench is strictly assessed after production. Many factors include part tolerances, size limitations, materials properties, mechanical analysis, and function realization have been analyzed. This product supports the top and front printing exit

h******t

The manufacture of Suncenter valve test bench involves some critical processes. These stages include concept confirmation, metal materials procurement, frame fabrication, components machining, surface painting, and final assembly. It meets a variety of low-to medium-volume printing applications

v******j

The design of Suncenter valve test bench involves many considerations. They may include stress points, support points, yield points, wear resistance capacity, toughness, and friction force. This product is certified under CCC, CE, RoHS, SAA, BIS, and BSMI

p******m

The product can bear the most demanding industrial conditions. It is made of heavy-duty materials such as steel alloys and is not prone to rust and corrosion. Its fast printing speed makes the daily task more efficient

Message du produit

*Nom

Téléphone

*Courriel

*Contenu