stable gas booster compressor system marketing for safety valve calibration

latest_products

Instructions de pompe à essai de pression manuelle

Pompe à essai de pression hydraulique / hydromique / hydrostatique

Cylindre à gaz Machine d'essai de mesure externe avec vestes d'eau

Pompe d'injection de réactif chimique pneumatique

Information produit
retour d'information

Gas booster pressure test bench

Suncenter - Air/Gas pressure test bench are compact and delicacy solution tailored to customer specific requirements with gas(air) boosters as well as all accessories to be fitted and installed in the frame or a closed cabinet.

To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator.

The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure.

Operating pressure up to 80 MPa, for higher pressure, pump with double driven heads is an ideal option.

Suncenter system gas booster compressor marketing for safety valve calibration-1

The hottest selling- Model C frame type cabinet picture

Suncenter system gas booster compressor marketing for safety valve calibration-2

◪ The standard gas booster pumps system including following parts:
◪ Air –driven gas booster pump (DGA/DGD/DGT three series for choosing)
◪ Stainless steel (carbon steel) material cabinet (Three models for choosing)
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge
◪ Gas inlet switch, Gas inlet pressure gauge
◪ Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’ special requirement.

Suncenter system gas booster compressor marketing for safety valve calibration-3

◪ DGS series air/gas pressure test bench with round chart recorder

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (ZG thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGA02	2：1	1.0	16	16	2-8 bar	2X PL	1/2 / 1/2	960 (at PA of 6 bar )
DGS-DGA05	5：1	0	40	40	2-8 bar	5XPL	1/2 / 1/2	680(at PA of 6 bar )
DGS-DGA10	10：1	3.5	80	80	2-8 bar	10XPL	3/8/ 3/8	210(at PA of 10 bar )
DGS-DGA25	25：1	7.0	200	200	2-8 bar	25XPL	1/4/ 1/4	120(at PA of 20 bar )
DGS-DGA40	40：1	10	320	320	2-8 bar	40XPL	1/4/ 1/4	200(at PA of 40 bar )
DGS-DGA60	60：1	20	480	480	2-8 bar	60XPL	1/4/ 1/4	180(at PA of 40 bar )
DGS-DGA100	100：1	25	800	800	2-8 bar	100XPL	1/4/ M14X1.5	136(at PA of 40 bar )
DGS-DGA130	130：1	35	800	1040	2-8 bar	130XPL	1/4/ M14X1.5	120(at PA of 40 bar )

Technical specification for DGS-DGD series

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (ZG thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGD10	10:1	3.5	80	80	2-8 bar	10XPL+ PA	3/8/3/8	410(at PA of 6 bar )
DGS-DGD25	25:1	10	200	200	2-8 bar	25XPL+ PA	1/4/1/4	396(at PA of 20 bar )
DGS-DGD40	40:1	15	320	320	2-8 bar	40XPL+ PA	1/4/1/4	320(at PA of 40 bar )
DGS-DGD60	60:1	25	480	480	2-8 bar	60XPL+ PA	1/4/1/4	215(at PA of 40 bar )
DGS-DGD100	100:1	35	800	800	2-8 bar	100XPL+ PA	1/4/M14*1.5	300(at PA of 60 bar )

Technical specification for DGS-DGT series

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (ZG thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGT25	25:1	0.1	10	200	2-8 bar	25XPL+3.5XPA	1/4/ 1/4	136(at PA of 8 bar )
DGS-DGT40	40:1	0.1	10	320	2-8 bar	40XPL+ 6XPA	1/4/1/4	124(at PA of 8 bar )
DGS-DGT10/60	10:1/60:1	0.1	10	480	2-8 bar	60XPL+6X PA	1/4/1/4	84(at PA of 8 bar )
DGS-DGT25/60	25:1/60:1	10	25	480	2-8 bar	60XPL+2.5XPA	1/4/1/4	80(at PA of 15 bar )
DGS-DGT100	100:1	0.1	10	800	2-8 bar	100XPL+10XPA	1/4/ M14*1.5	63(at PA of 8 bar )

video

a******b

gas booster compressor The structure design is reasonable, the texture is solid and thick, the quality is safe and reliable, both beautiful and practical, it is a durable LED lamp shell product.

u******f

gas booster compressor The materials are carefully selected, the workmanship is fine, the surface is flat and smooth, the details are handled in place, there is no flaw, the texture is solid and thick, the quality is high, durable, and it can guarantee lasting brightness after long-term use.

k******h

gas booster compressor The design is scientific and reasonable, the structure is tight and compact, the quality is safe and reliable, the adaptability is strong, and it can adapt to various complex weathers for continuous operation.

s******m

[企业简称] Insist on selecting high-quality raw materials and adopt fine processing technology to manufacture gas booster compressor. The produced gas booster compressor is excellent in workmanship, exquisite in shape, high in quality, has high ornamental value and collection value, and is favored by customers in the market .

u******m

air pressure testing Excellent material selection, fine workmanship, stable quality, reliable quality, you can buy and use with confidence.

l******k

The product stands out for its stable operation. Since it is mainly controlled by microcomputers, it can run stably without any break.

Message du produit

*Nom

Téléphone

*Courriel

*Contenu