long life hydrostatic test pump dls producer forshipbuilding

latest_products

Instructions de pompe à essai de pression manuelle

Pompe à essai de pression hydraulique / hydromique / hydrostatique

Cylindre à gaz Machine d'essai de mesure externe avec vestes d'eau

Pompe d'injection de réactif chimique pneumatique

Information produit
retour d'information

Suncenter DLS Series hydraulic pressure test pump

SUNCENTER- Hydraulic test benches are compact and delicacy solution tailored to customer specific requirements with air driven liquid pumps as well as all accessories to be fitted and installed on the frame or in closed cabinet.

To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator. The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. SUNCENTER Hydraulic power packs are available with wide range of pressure ratios make these series of pumps ideal for powering a variety of oil/hydraulic operations. The maximum operating pressure up to 640 MPa.

As the pressure will be generated by means of a pneumatically operated pump，the electric connection will not be necessary. To operate this system, the air driven liquid pump have to be equipped with the air control unit combined filter and water separator, pressure-regulating valve, pressure control gauge as well as manual relieve valve. In this operation, the pump will be mounted to the stainless steel tank in the closed cabinet in a compact and space saving manner. Pressure gauges, valves and pressure regulators will be fitted on panel.

The desired operating pressure can be attained by adjusting the driving air pressure. When the driving air pressure and the output pressure reach the balance, the pump stops filling pressure and the output pressure stays at the preset value. This hydraulic unit can be used for all kinds of pressure testing and test tools for research and test institutes or for other functions requiring a determined pressure.

Suncenter long life hydrostatic test pump producer forshipbuilding-1

Suncenter long life hydrostatic test pump producer forshipbuilding-2

DLS Sereis hydraulic pressure test bench-The hottest selling Model C cabinet

Suncenter long life hydrostatic test pump producer forshipbuilding-3

◪ The standard hydraulic test bench including following parts:
◪ Air –driven liquid booster pump
◪ Stainless steel material cabinet (Three models for choosing)
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge, water tank
◪ Liquid inlet/outlet switch, high pressure liquid guage, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’ special requirement.

Suncenter long life hydrostatic test pump producer forshipbuilding-4

Suncenter long life hydrostatic test pump producer forshipbuilding-5

Model	Pressure Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Driven air inlet port	High pressure Outlet port	MAX Flow (L/min)**
DLS-DGGD4	4:1	3-8 bar	4XPL	32	G 1/2	NPT/ZG	70.0
DLS-DGG6	6:1	3-8 bar	6XPL	48	G 1/2	NPT/ZG	29.91
DLS-DGG10	10:1	3-8 bar	10XPL	80	G 1/2	NPT/ZG	18.84
DLS-DGG16	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	12.42
DLS-DGG28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	7.11
DLS-DGG40	40:1	3-8 bar	40XPL	320	G 1/2	NPT/ZG	4.89
DLS-DGG64	64:1	3-8 bar	64XPL	512	G 1/2	NPT/ZG	3.08
DLS-DGG80	80:1	3-8 bar	80XPL	640	G 1/2	NPT/ZG	2.44
DLS-DGG100	100:1	3-8 bar	100XPL	800	G 1/2	NPT/ZG	1.92
DLS-DGG130	130:1	3-8 bar	130XPL	1040	G 1/2	NPT/ZG	1.47
DLS-DGG175	175:1	3-8 bar	175XPL	1400	G 1/2	NPT/ZG	1.14
DLS-DGG255	255:1	3-8 bar	255XPL	2040	G 1/2	NPT/ZG	0.75
DLS-DGG400	400:1	3-8 bar	400XPL	3200	G 1/2	NPT/ZG	0.48
DLS-DGG510	510:1	3-8 bar	510XPL	4080	G 1/2	NPT/ZG	0.65
DLS-DGG800	800:1	3-8 bar	800XPL	6400	G 1/2	NPT/ZG	0.42

video

k******l

The design of Suncenter hydrostatic test pump is born with many considerations. They are aesthetic, ease of handling, operator safety, force/stress analysis, etc. It is easy to store as the product is lightweight and compact

t******y

The fibre of Suncenter hydraulic pressure test pump must be inspected strictly before it leaves the factory. The fibre must be evaluated in terms of strength, tensile strength, gram weight and feel. The product has good diffusivity to point light source

x******h

Suncenter hydrostatic test pump is meticulously designed. Its development takes into considerations that operational efficiency, functionality, productivity, component performance, operation safety, etc. It is resistant to many mineral oils, organic acids, alkalis, etc

z******d

Suncenter hydraulic pressure test pump has passed various tests. For example, our QC team has tested its elasticity, color fastness and water repellency. The product has good diffusivity to point light source

o******v

Suncenter hydraulic pressure test pump is manufactured using a variety of processes. That is, through mechanical drawing, stamping, painting, drying, polishing, testing, and assembly. Mould, mildew, fungus, etc. won't appear on its surface

u******i

This product is noted for its high quality and reliability. The product can find its application values in the fields of electronics, lamps, printing, toy and food

Message du produit

*Nom

Téléphone

*Courriel

*Contenu