air driven liquid pump driven overseas market for metallurgy

latest_products

Instructions de pompe à essai de pression manuelle

Pompe à essai de pression hydraulique / hydromique / hydrostatique

Cylindre à gaz Machine d'essai de mesure externe avec vestes d'eau

Pompe d'injection de réactif chimique pneumatique

Information produit
retour d'information

Company Advantages
1. Each Suncenter high pressure pneumatic pump consists of certified raw materials as standard. It can be used for a broad variety of liquids, such as oil, water, and chemical
2. Dongguan Suncenter Fluid Control Equipment Co., Ltd has strong innovation ability, research ability and development ability for air driven liquid pump . The speed of this product can be adjusted steplessly
3. The product can bear the most demanding industrial conditions. It is made of heavy-duty materials such as steel alloys and is not prone to rust and corrosion. It has flexibility without the use of unloaders or bypass valves
4. This product features high precision. It can produce an exact result every single time and repeat the exact same task with the same level. The speed of this product is infinitely variable

Compressed Air Driven Hydraulic Pump-DGG Series

We offer the most complete range of Air driven liquid pump models in the industry measured for:

Capability of ultimate pressure, flow or output horsepower.

Suncenter high pressure pneumatic pump driven for metallurgy-1

Compatibility with a broad variety of liquids, such as oil, water and chemical applications.

SUNCENTER pumps are air driven at a drive air pressure of 1bar to 8bar (14.5 psi to116 psi) by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.

Suncenter pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios， while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal liquid pressure can be calculated.

SUNCENTER pumps are self priming. In general it is not necessary to use an air line lubricator. The liquid to be pumped flows into the suction chamber by the up-stroke of the drive piston. By this suction effect, the inlet check valve is opened and the outlet check valve is closed. The down-stroke generates the pressure at the liquid side. The inlet check valve is closed and the outlet check valve is opened by the generated pressure. SUNCENTER liquid pumps cycle automatically, where the pressure is built up the numbers of cycles slow down, the pump stops automatically when the output pressure forces are equal. The pump restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. Pump performance can be affected by a number of conditions, such as freezing of muffler or pilot valves (which is caused by moisture in air lines), inadequate inlet air line sizes and dirty filers. Don’t reduce the indicated port sizes and consult SUNCENTER for exact flow conditions not shown in charts.

Suncenter high pressure pneumatic pump driven for metallurgy-2

DGG Series Liquid Pumps(Single acting, single air drive head)

Suncenter high pressure pneumatic pump driven for metallurgy-3

◪ DGG pumps have aluminum bodies and wetted materials of stainless steel or carbon steel ,which depends on different service liquid. Materials of stainless steel, make them an excellent choice of water application. High quality seals, long service life available.

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)
DGG6	6:1	2-8 bar	6XPL	48	NPT1/2	NPT1/2	29.91
DGG10	10:1	2-8 bar	10XPL	80	NPT1/2	NPT1/2	18.84
DGG16	16:1	2-8 bar	16XPL	128	NPT1/2	NPT1/2	12.42
DGG28	28:1	2-8 bar	28XPL	224	NPT1/2	NPT1/2	7.11
DGG40	40:1	2-8 bar	40XPL	320	NPT1/2	NPT1/2	4.89
DGG64	64:1	2-8 bar	64XPL	512	NPT1/2	NPT3/8	3.08
DGG80	80:1	2-8 bar	80XPL	640	NPT1/2	NPT3/8	2.44
DGG100	100:1	2-8 bar	100XPL	800	NPT1/2	NPT3/8	1.92
DGG130	130:1	2-8 bar	130XPL	1040	NPT1/2	M14X1.5	1.47
DGG175	175:1	2-8 bar	175XPL	1400	NPT3/8	M14X1.5	1.14
DGG255	255:1	2-8 bar	255XPL	2040	NPT1/4	M14X1.5	0.75
DGG400	400:1	2-8 bar	400XPL	3200	NPT1/4	M14X1.5	0.48
DGG510	510:1	2-8 bar	510XPL	4080	NPT1/4	M14X1.5	0.65
DGG800	800:1	2-8 bar	800XPL	6400	NPT1/4	M14X1.5	0.42

DLS Liquid (hydraulic) booster system = Liquid pump+ following valves, gages, and parts

Suncenter high pressure pneumatic pump driven for metallurgy-4

◪ The standard liquid pump system including following parts:
◪ Air –driven liquid booster pump (DGM/DGG/DGGD Three series for choosing)
◪ Stainless steel (carbon steel) material cabinet (Three models for choosing)
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge, water tank
◪ Liquid inlet/outlet switch, high pressure liquid guage, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’ special requirement.

DLS series Liquid Pressure Booster Pump System-The hottest selling Model C cabinet

Suncenter high pressure pneumatic pump driven for metallurgy-5

◪ DLS series Liquid Pressure Booster Pump System-The hottest selling Model C cabinet

Suncenter DLS Series Pneumatic (Air driven) Liquid Booster System

Suncenter- DLS Series Pneumatic(Air driven) Hydraulic Power Packs

SUNCENTER- Hydraulic power packs(Liquid pump system) are compact and delicacy solution tailored to customer specific requirements with air driven liquid pumps as well as all accessories to be fitted and installed on the frame or in closed cabinet.

To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator. The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. SUNCENTER Hydraulic power packs are available with wide range of pressure ratios make these series of pumps ideal for powering a variety of oil/hydraulic operations. The maximum operating pressure up to 640 MPa.

As the pressure will be generated by means of a pneumatically operated pump，the electric connection will not be necessary. To operate this system, the air driven liquid pump have to be equipped with the air control unit combined filter and water separator, pressure-regulating valve, pressure control gauge as well as manual relieve valve. In this operation, the pump will be mounted to the stainless steel tank in the closed cabinet in a compact and space saving manner. Pressure gauges, valves and pressure regulators will be fitted on panel.

The desired operating pressure can be attained by adjusting the driving air pressure. When the driving air pressure and the output pressure reach the balance, the pump stops filling pressure and the output pressure stays at the preset value. This hydraulic unit can be used for all kinds of pressure testing and test tools for research and test institutes or for other functions requiring a determined pressure.

Suncenter high pressure pneumatic pump driven for metallurgy-6

features

※ Compressed Air driven - no electricity required (connect to normal air compressor)
※ In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
※ No airline lubricator required
※ Pressures to 640Mpa (6400 bar)
※ Wide range of models with different ratios
※ Built-in-cooling on most models
※ Easy to install, operate and maintain
※ Best price / performance ratio
※ No heat, flame or spark risk and explosion proof
※ Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter pump will automatically start, keep the loop pressure constant

video

Company Features
1. Dongguan Suncenter Fluid Control Equipment Co., Ltd has strong air driven liquid pump design and manufacturing capabilities. Almost all its high pressure pneumatic pump are self-designed and manufactured.
2. The service philosophy of Dongguan Suncenter Fluid Control Equipment Co., Ltd has always been maximator air driven liquid pump . Get info!

t******i

Suncenter high pressure pneumatic pump has ensured quality. Its design has been tested over time to meet the challenges of the packaging and printing markets. It has the advantage of good breaking strength

d******h

The design and manufacture of Suncenter air driven liquid pump are done using templates provided by customers. They are strictly in accordance with size and printing requirements. It will bond instantly as soon as people apply it and add pressure to it, saving the time waiting for the adhesive to cure

q******g

The design of Suncenter maximator air driven liquid pump takes a lot of effort. The design team devoted a lot of time to market research in the packaging and printing industries. At the same time. This product features a low unwind force

x******m

The manufacturing process of Suncenter high pressure pneumatic pump has been greatly improved. Our professionals implement a complete print management system to improve product quality and minimize the impact on the environment. This product can be applied in the various base materials, such as wood, metal, plastics, leather, and paper

g******e

Suncenter air driven liquid pump from our company has excellent quality. Materials used for it are sourced from trustworthy suppliers and are of first-class. This product is widely used in the fields of industrial packaging, offices, advertising, shipping, etc

y******z

All the difference in texture and feature sets this product apart from the competition. The product is available in many different sizes and viscosity levels

Message du produit

*Nom

Téléphone

*Courriel

*Contenu