effective valve test bench control free design for industry

latest_products

Instructions de pompe à essai de pression manuelle

Pompe à essai de pression hydraulique / hydromique / hydrostatique

Cylindre à gaz Machine d'essai de mesure externe avec vestes d'eau

Pompe d'injection de réactif chimique pneumatique

Information produit
retour d'information

Product Comparison

After being improved greatly, Suncenter Fluid Control Equipment's hydro test pump is more advantageous in the following aspects.

Company Advantages
1. The raw materials of Suncenter hydro pressure test pump is only selected from vendors of the industry.
2. The product is extremely praised owing to their high quality and longer service life.
3. Mature technology, standardized production and strict quality management system ensure the quality of valve test bench .
4. Dongguan Suncenter Fluid Control Equipment Co., Ltd's products are known worldwide and can be found in many places.

Introduction

Suncenter control valve test bench free design for industry-1

◪ The safety valve test bench is a new type of pressure test device developed by our company for reference to GB/T 12242-2005 (pressure release device and performance test specification), which is used to adjust and test the setting pressure of the safety valve.

Function and features

Safety valve test bench is used for various safety valve setting pressure adjustment, the whole set pressure detection, discharge pressure detection, back seat pressure testing, assessment of its pressure safety performance etc.. ,

◪ A. pressure range: 0-480 bar for option(gas pressure and water pressure)
◪ B. test medium: air, nitrogen, water;
◪ C. test valve diameter: DN15-DN400 for option
◪ D. pressure control accuracy: less than 1%F.S;
◪ E. pressure measurement accuracy: 0.4 pressure gauge (optional higher pressure level);

◪ F. Clamping way: hydraulic cylinder clamping;
◪ G. station interface type: screw and flange type
◪ H. clamping force output range: 0-50 tons;
◪ I. supply voltage: 50Hz -60Hz ,220V/380V for option
◪ J.Size：1500×1200×900mm(machine) +1500×800×800mm(clamping device)

Control panel

Suncenter control valve test bench free design for industry-2

Clamping seat

Suncenter control valve test bench free design for industry-3

Schematic diagram

Suncenter control valve test bench free design for industry-4

Instruction for software control part

Suncenter control valve test bench free design for industry-5

◪ Figure 1
◪ The first step: start the computer and double click the boot program, as shown in Figure 1.
◪ The second step: after the program, enter the main interface of the program.

Suncenter control valve test bench free design for industry-6

◪ In the main interface, select the appropriate sensor, and pay attention to the selection of the sensor not to exceed the 2/3. of the measuring process ,as shown in Figure3

Suncenter control valve test bench free design for industry-7

◪ In the main interface, choose water pressure test or air pressure test. As shown in Figure 4.

Suncenter control valve test bench free design for industry-8

◪ After selecting the pressure or water pressure test, click the menu bar test information to set the options. As shown in Figure 5.

Suncenter control valve test bench free design for industry-9

◪ Display the dialog box for the test information, as shown in Figure6

With printer,could print the testing report directly.

Suncenter control valve test bench free design for industry-10

Suncenter control valve test bench free design for industry-11

Suncenter control valve test bench free design for industry-12

◪ Safety valve test bench SVT40-DN400-CC computer control model

video

Company Features
1. As the economy goes, Suncenter has been the prominent valve test bench supplier in this industry.
2. All testing reports are available for our hydrostatic pressure test.
3. From the efficiency of our buildings to our progress in managing energy, water, and waste, we continue to find ways to reduce the company's impact on the environment and embed sustainability throughout our businesses. We constantly seek to improve energy and resource consumption during production by consistently reviewing our processes and implementing individual site initiatives such as eco-efficient lighting, insulation, and heating systems.

a******q

Suncenter hydrostatic pressure test is designed to streamline cleaning processes and ensure that the bathroom is protected from limescale and hard water deposits. A total of 11 steps are built for custom service at APTEK such as technical feasibility analysis

y******f

Suncenter valve test bench has been strictly tested. The testing involves metals precipitation, oil and grease removal, and BOD or COD removal. APTEK supplies different custom services for different applications such as food & beverage business

l******n

Suncenter hydro pressure test pump is professionally designed. It is designed with the help of a modern 3D software environment which is accompanied by a complete 2D documentation necessary for the production of the machine. At APTEK, certificates such as ROHS and UL are strong evidence of our capabilities

a******y

Suncenter hydro pressure test pump is professionally designed. It is designed by our professional designers who have mastered the elements and principles of bag design and color matching knowledge. APTEK is a focus on industrial connectors for nearly 10 years

w******l

Suncenter hydro pressure test pump is developed integrating with many technologies such as biometrics, RFID, and self-checkouts, which are widely used in the POS system field. APTEK supplies different custom services for different applications such as food & beverage business

c******x

valve test bench is a high-quality toy product refined in strict accordance with the national standards of the toy industry. It has a thick texture, a firm structure, and has the characteristics of wear resistance, anti-aging and non-deformation. It is deeply loved by new and old customers in the market.

Message du produit

*Nom

Téléphone

*Courriel

*Contenu