advanced technology high pressure water pump hydraulic producer for mining

latest_products

Instructions de pompe à essai de pression manuelle

Pompe à essai de pression hydraulique / hydromique / hydrostatique

Cylindre à gaz Machine d'essai de mesure externe avec vestes d'eau

Pompe d'injection de réactif chimique pneumatique

Information produit
retour d'information

Product Comparison

Suncenter Fluid Control Equipment's booster pumps has more advantages over similar products in terms of technology and quality.

Company Advantages
1. Properties like hydrostatic pressure test pump can be customized to continuous function value optimization.
2. The performance of this product is superior to other similar products on the market.
3. The product has been tested to meet international quality standards.
4. Suncenter Fluid Control Equipment sees major opportunities to apply its innovative competencies in the areas of high pressure water pump .
5. Dongguan Suncenter Fluid Control Equipment Co., Ltd has set up a relatively perfect sales network and after-sales service system.

Suncenter DLS Series hydraulic pressure test pump

SUNCENTER- Hydraulic test benches are compact and delicacy solution tailored to customer specific requirements with air driven liquid pumps as well as all accessories to be fitted and installed on the frame or in closed cabinet.

To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator. The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. SUNCENTER Hydraulic power packs are available with wide range of pressure ratios make these series of pumps ideal for powering a variety of oil/hydraulic operations. The maximum operating pressure up to 640 MPa.

As the pressure will be generated by means of a pneumatically operated pump，the electric connection will not be necessary. To operate this system, the air driven liquid pump have to be equipped with the air control unit combined filter and water separator, pressure-regulating valve, pressure control gauge as well as manual relieve valve. In this operation, the pump will be mounted to the stainless steel tank in the closed cabinet in a compact and space saving manner. Pressure gauges, valves and pressure regulators will be fitted on panel.

The desired operating pressure can be attained by adjusting the driving air pressure. When the driving air pressure and the output pressure reach the balance, the pump stops filling pressure and the output pressure stays at the preset value. This hydraulic unit can be used for all kinds of pressure testing and test tools for research and test institutes or for other functions requiring a determined pressure.

Suncenter advanced technology high pressure water pump producer for mining-1

Suncenter advanced technology high pressure water pump producer for mining-2

DLS Sereis hydraulic pressure test bench-The hottest selling Model C cabinet

Suncenter advanced technology high pressure water pump producer for mining-3

◪ The standard hydraulic test bench including following parts:
◪ Air –driven liquid booster pump
◪ Stainless steel material cabinet (Three models for choosing)
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge, water tank
◪ Liquid inlet/outlet switch, high pressure liquid guage, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’ special requirement.

Suncenter advanced technology high pressure water pump producer for mining-4

Suncenter advanced technology high pressure water pump producer for mining-5

Model	Pressure Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Driven air inlet port	High pressure Outlet port	MAX Flow (L/min)**
DLS-DGGD4	4:1	3-8 bar	4XPL	32	G 1/2	NPT/ZG	70.0
DLS-DGG6	6:1	3-8 bar	6XPL	48	G 1/2	NPT/ZG	29.91
DLS-DGG10	10:1	3-8 bar	10XPL	80	G 1/2	NPT/ZG	18.84
DLS-DGG16	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	12.42
DLS-DGG28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	7.11
DLS-DGG40	40:1	3-8 bar	40XPL	320	G 1/2	NPT/ZG	4.89
DLS-DGG64	64:1	3-8 bar	64XPL	512	G 1/2	NPT/ZG	3.08
DLS-DGG80	80:1	3-8 bar	80XPL	640	G 1/2	NPT/ZG	2.44
DLS-DGG100	100:1	3-8 bar	100XPL	800	G 1/2	NPT/ZG	1.92
DLS-DGG130	130:1	3-8 bar	130XPL	1040	G 1/2	NPT/ZG	1.47
DLS-DGG175	175:1	3-8 bar	175XPL	1400	G 1/2	NPT/ZG	1.14
DLS-DGG255	255:1	3-8 bar	255XPL	2040	G 1/2	NPT/ZG	0.75
DLS-DGG400	400:1	3-8 bar	400XPL	3200	G 1/2	NPT/ZG	0.48
DLS-DGG510	510:1	3-8 bar	510XPL	4080	G 1/2	NPT/ZG	0.65
DLS-DGG800	800:1	3-8 bar	800XPL	6400	G 1/2	NPT/ZG	0.42

video

Company Features
1. Dongguan Suncenter Fluid Control Equipment Co., Ltd has strong technical strength and staff equipment to help the company develop.
2. Suncenter Fluid Control Equipment provides the latest technology to exceed customer and business needs.
3. We strive to provide the most innovative product and service to our clients. We will conduct different kinds of solutions or services around the product with our clients. Please contact us! We are always fully prepared for our customers high pressure water pump . Please contact us!

f******h

Suncenter hydrostatic pressure test pump has ensured quality. Its design has been tested over time to meet the challenges of the packaging and printing markets.

d******i

The design and manufacture of Suncenter hydrostatic pressure test pump are done using templates provided by customers. They are strictly in accordance with size and printing requirements. We provide one stop service of Design-Prototype-Injection mould

n******k

The design of Suncenter hydrostatic pressure test pump takes a lot of effort. The design team devoted a lot of time to market research in the packaging and printing industries. At the same time. With its own superb technology and efficient service, Tuowei hand model is well accepted at home and abroad

g******m

The manufacturing process of Suncenter high pressure water pump has been greatly improved. Our professionals implement a complete print management system to improve product quality and minimize the impact on the environment. Prototype is made by CNC Milling,and the involved surface finishing including polishing, painting, the logo sticking

x******c

Suncenter hydrostatic pressure test pump from our company has excellent quality. Materials used for it are sourced from trustworthy suppliers and are of first-class. Prototype is made by CNC Milling,and the involved surface finishing including polishing, painting, the logo sticking

e******c

All the difference in texture and feature sets this product apart from the competition. Our products are well packaged and protected during transportation

Message du produit

*Nom

Téléphone

*Courriel

*Contenu