Stable air hydraulic pump liquid on sale for machinery

Company Advantages
1. Suncenter maximator air driven liquid pump has gone through a series of production processes. They involve CAD/CAM design, prototyping, milling, turning, welding, painting, and commissioning. This product has a compact and robust design
2. The product, with so many good characteristics, has high practical value, playing an increasing role in the industry. It helps save costs and prevent contamination
3. The product has good elongation. It has been tested under the stress-strain condition to check whether it will break with the increasing tensile load. It can be used for a broad variety of liquids, such as oil, water, and chemical
4. The product has the advantage of good heat dissipation. Its latest cooling system enables adequate airflow, which makes it not accumulate too much heat. Its operation is safe with no heat, flame or spark risk
5. This product is so uniquely weaving processed that the fabric features large density, fine lines, smooth texture, more durable than ordinary bedding, and softer. It can be tailored to meet the specific requirements of customers

We offer the most complete range of Air driven liquid pump models in the industry measured for:

SUNCENTER pumps are air driven at a drive air pressure of 1bar to 8bar (14.5 psi to116 psi) by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.

Suncenter pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios， while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal liquid pressure can be calculated.

SUNCENTER pumps are self priming. In general it is not necessary to use an air line lubricator. The liquid to be pumped flows into the suction chamber by the up-stroke of the drive piston. By this suction effect, the inlet check valve is opened and the outlet check valve is closed. The down-stroke generates the pressure at the liquid side. The inlet check valve is closed and the outlet check valve is opened by the generated pressure. SUNCENTER liquid pumps cycle automatically, where the pressure is built up the numbers of cycles slow down, the pump stops automatically when the output pressure forces are equal. The pump restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. Pump performance can be affected by a number of conditions, such as freezing of muffler or pilot valves (which is caused by moisture in air lines), inadequate inlet air line sizes and dirty filers. Don’t reduce the indicated port sizes and consult SUNCENTER for exact flow conditions not shown in charts.

Company Features
1. Dongguan Suncenter Fluid Control Equipment Co., Ltd's products have been available in Chinese market for more decades of years.
2. Dongguan Suncenter Fluid Control Equipment Co., Ltd is globally well-known for the technology strength.
3. To establish the service philosophy of maximator air driven liquid pump is the base of Dongguan Suncenter Fluid Control Equipment Co., Ltd's work. Get an offer!