newly fire extinguisher refill machine for fire extinguisher

DGS-FM-5A model automatic FM200 filling machine

Solution A (DGS-FM-5A) added the sensors, electromagnetic valve, vacuum pump, and the electronic scale based on solution B (manual control),it is automatic control mode

newly fire extinguisher refill machine for fire extinguisher-1

◪ Main parameters:
◪ The driving source: compressed air (by air compressor, need 3-8 bar air pressure)
◪ Medium: FM200/ NOVEC/Nitrogen
◪ Boost ratio: 5:1
◪ Output pressure: 4.2 Mpa/5.3Mpa
◪ Driven air inlet port: fast insert 12 per cent
◪ Nitrogen/FM200 inlet port: ZG3/8 internal thread
◪ High pressure gas outlet port: ZG3/8 internal thread
◪ Electric scale range:0-500kg（there is also max 1000kg for optional）

DGS-DGGD16 model liquid CO2 filling equipment

newly fire extinguisher refill machine for fire extinguisher-2

◪ The CO2 Fire Extinguisher filling equipment including following parts:
◪ Air–driven liquid CO2 gas booster pump
◪ Stainless steel material cabinet
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge
◪ Gas inlet switch, Gas inlet pressure gauge
◪ Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’special requirement.

Model	Pressure Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Driven air inlet port	High pressure Outlet port	MAX Flow (L/min)**
DGS-DGG16	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	12.42
DGS-DGG28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	7.11
DGS-DGGD166	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	19.73
DGS-DGGD28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	11.30

DGS-CO2-B model liquid CO2（fire extinguisher） filling machine

newly fire extinguisher refill machine for fire extinguisher-3

◪ Main parameters:
◪ The driving source: compressed air (by air compressor, need 3-8 bar air pressure)
◪ Medium: CO2
◪ Max output pressure: 12.8Mpa
◪ Driven air inlet port: fast insert 12 per cent
◪ Liquid CO2 inlet port: ZG3/8 internal thread
◪ High pressure gas outlet port: ZG3/8 internal thread

Fire Extinguisher filling

newly fire extinguisher refill machine for fire extinguisher-4

newly fire extinguisher refill machine for fire extinguisher-5

video

y******h

Suncenter fire extinguisher refill is thoroughly tested before it is packed. It goes through different quality tests to meet the stringent quality standards required in the sanitary ware industry.

n******r

The whole production process of Suncenter fire extinguisher filling equipment is strictly controlled, from the selection of finest fabrics and pattern cutting to the check for accessories safety. Hanway has been specialized in aluminum, zinc and brass die casting for over 13 years

w******m

During the production of Suncenter fire extinguisher filling equipment, the accuracy of machining and grinding, surface roughness, concentricity, and verticality are all strictly scrutinized to guarantee high quality. We make products according to customer's own drawing design

z******u

The manufacturing process of Suncenter fire extinguisher refill is strictly overseen. The amounts of raw materials or water are exactly calculated by the computer. Our staff will promptly give our response to customers

e******e

The design of Suncenter fire extinguisher refill is conducted based on the heat dissipation theory by the designers who aim to provide customers with a complete heat dissipation solution including the prototype, design, and production. Hanway has been specialized in aluminum, zinc and brass die casting for over 13 years

s******e

It has good chemical stability. It is not prone to have a reaction with light, heat, acid, alkali, and organic solvents. Effective quality management system can ensure high quality and stability of products continuously

Message du produit

*Nom

Téléphone

*Courriel

*Contenu