gas booster system | Gas booster pump

latest_products

Instructions de pompe à essai de pression manuelle

Pompe à essai de pression hydraulique / hydromique / hydrostatique

Cylindre à gaz Machine d'essai de mesure externe avec vestes d'eau

Pompe d'injection de réactif chimique pneumatique

Information produit
retour d'information

Product Details

Suncenter Fluid Control Equipment's hydro test pump is processed based on the latest technology. It has excellent performances in the following details.

Company Advantages
1. pressure booster pump features delicate colors, such as gas booster system .
2. The products conform to strict quality standards.
3. A strict quality monitoring system guarantees the quality of the product.
4. The product can replace labor to achieve mechanization and automation in production. It is widely applied in light and heavy industries.
5. With improvements in sensors, materials, and building management technology, designers are increasingly able to consider this product as design solutions.

Compressed Air Driven Gas Booster Pump- DGA/DGD/DGT Series

Suncenter Air Driven Gas Boosters provide for pressures up to 80Mpa (11,600 psi). Used for virtually all known gases, these boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging. Key features include:

Applications for Air Driven Gas Boosters

SUNCENTER Air Driven Gas Boosters provide for pressures up to 80Mpa. Used for oil free compression not only of air or Nitrogen, but also flammable and risk gases like hydrogen, oxygen and natural gas. These boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging.

Air driven boosters are an efficient alternative instead of electrically driven products and can be used in explosion- proof areas.

As a result of the wide range of models it is possible to select the optimum booster for each application. Single stage, double acting or two stage boosters or a combination of these models can be used to achieve different operating pressures and flow capacities.

SUNCENTER Air Driven Gas Boosters are ideal and widely used for hydrostatic and burst testing for valves, pipes, tubing and pressure vessels; Calibration for safety valves; Automobile regulator detecting and telecommunication cable inflatable appliances.

Gas booster DGA60 model-1

DGA series gas booster pumps(Single acting, single air drive head):

◪ DGA pumps are available with high quality seals, which provide significantly better service life as well. Pump head fitted with exhaust cooling devices. All parts in contact with the gas are made of stainless steel.

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGA02	2：1	1.0	16	16	2bar-8 bar	2X PL	1/2 / 1/2	960 (at PA of 6 bar )
DGA05	5：1	0	40	40	2bar-8 bar	5XPL	1/2 / 1/2	680(at PA of 6 bar )
DGA06	6：1	2.0	48	48	2bar-8 bar	6XPL	1/2 / 1/2	360(at PA of 10 bar )
DGA10	10：1	3.5	80	80	2bar-8 bar	10XPL	3/8/ 3/8	210(at PA of 10 bar )
GA15	15：1	3.5	120	120	2bar-8 bar	15XPL	3/8/ 3/8	190(at PA of 10 bar )
DGA25	25：1	7.0	200	200	2bar-8 bar	25XPL	1/4/ 1/4	120(at PA of 20 bar )
DGA40	40：1	10	320	320	2bar-8 bar	40XPL	1/4/ 1/4	200(at PA of 40 bar )
DGA60	60：1	20	480	480	2bar-8 bar	60XPL	1/4/ 1/4	180(at PA of 40 bar )
DGA100	100：1	25	800	800	2bar-8 bar	100XPL	1/4/ M14X1.5	136(at PA of 40 bar )

DGD series gas booster pumps(Double acting ):

◪ DGD series pumps are double acting, with single air driven heads type. 
◪ DGD pumps are available with high quality seals, which provide significantly better service life
◪ Double pump heads with exhaust cooling devices. 
◪ All components in contact with the gas are made of stainless steel. 
◪ Pipes mounting way are available as customized.

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGD10	10:1	3.5	80	80	2bar-8 bar	10XPL+ PA	3/8/3/8	410(at PA of 6 bar )
DGD15	15:1	5	120	120	2bar-8 bar	15XPL+ PA	3/8/3/8	350 (at PA of 6 bar )
DGD25	25:1	10	200	200	2bar-8 bar	25XPL+ PA	1/4/1/4	396(at PA of 20 bar )
DGD40	40:1	15	320	320	2bar-8 bar	40XPL+ PA	1/4/1/4	320(at PA of 40 bar )
DGD60	60:1	25	480	480	2bar-8 bar	60XPL+ PA	1/4/1/4	215(at PA of 40 bar )
DGD100	100:1	35	800	800	2bar-8 bar	100XPL+ PA	1/4/M14*1.5	300(at PA of 60 bar )
DGD130	130:1	50	1040	1040	2bar-8 bar	130XPL+ PA	1/4/M14*1.5	180(at PA of 60 bar )

DGT series gas booster pumps(Double acting, double stage, single air drive head ):

◪ DGT pumps are double acting, double stage with single air drive head pumps. They can provide for super high pressure with very low inlet pressure.
◪ DGT pumps are available with high quality seals, which provide significantly better service life
◪ All parts in contact with the gas are made of stainless steel.

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGT15	15:1	0.1	56	120	2-8 bar	15XPL	3/8/ 1/4	230(at PA of 8 bar )
DGT25	25:1	0.1	10	200	2-8 bar	25XPL	3/8/ 1/4	156(at PA of 8 bar )
DGT7/25	25:1	5	56	200	2-8 bar	25XPL	3/8/ 1/4	156(at PA of 8 bar )
DGT40	40:1	0.1	10	320	2-8 bar	40XPL	3/8/ 1/4	124(at PA of 8 bar )
DGT15/40	40:1	5	120	320	2-8 bar	40XPL	3/8/ 1/4	124(at PA of 8 bar )
DGT60	60:1	0.1	10	480	2-8 bar	60XPL	3/8/ 1/4	80(at PA of 15 bar )
DGT15/60	60:1	6	120	480	2-8 bar	60XPL	3/8/ 1/4	80(at PA of 15 bar )
DGT100	100:1	0.1	10	800	2-8 bar	100XPL	3/8/ 1/4	63(at PA of 8 bar )

◪ DGT series gas booster working picture 

Gas pressure booster for cylinder transfer and filling

DGS series gas booster system working picture

features

※ Compressed Air driven - no electricity required (connect to normal air compressor)
※ In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
※ No airline lubricator required
※ Hydrocarbon free - separation between air and gas sections
※ Pressures to 80Mpa (11,600 psi)
※ Wide range of models with different ratios
※ Built-in-cooling on most models
※ Easy to install, operate and maintain
※ Best price / performance ratio
※ No heat, flame or spark risk and explosion proof 
※ Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter pump will automatically start, keep the loop pressure constant 
※ Applicable gas:Air/Ar(Argon)/He(Helium)/H2(Hydrogen)/O2(Oxygen)N2(Nitrogen) CO2/NO2/CH4/C2H2/LNG/LPG/CNG/FM200/SF6/H2S etc

video

Company Features
1. Dongguan Suncenter Fluid Control Equipment Co., Ltd is a company which is specialized in producing pressure booster pump covering a wide range of working area.
2. The factory is situated in a place where is near to the raw materials suppliers. This guarantees the quality and quantity of raw materials, as well as relatively low sourcing costs.
3. All the staff of Suncenter Fluid Control Equipment will make unremitting efforts, and bravely climb the peak of nitrogen pumps industry. Please contact. Our goal is to win the market through our professional gas booster and services. Please contact.

q******p

The design & engineering team of Suncenter gas booster system applies state-of-the-art software and 3D mechanical CAD programming to finish the design from conception through completion. The product is easy to maintain and helps improve productivity

g******c

Suncenter pressure booster pump is processed with high-tech dyeing techniques. It will be dyed based on customers' requirements of different dyeing methods, mainly direct dyeing, mordant dyeing, overdye, or wet-on-wet dyeing. It helps save costs and prevent contamination

j******b

The quality of Suncenter gas booster system is guaranteed by a series of tests. It has gone through inspection on its seam force, tensile strength, fiber stiffness, fiber resilience, etc. The product combines principles of simple operation with rugged construction

b******o

The production of Suncenter pressure booster pump is well controlled by the computer. The computer exactly calculates the necessary amounts of raw materials, water, etc to reduce unnecessary waste. The product combines principles of simple operation with rugged construction

t******y

Suncenter pressure booster pump is strictly inspected during production. It is checked on its appearance (porosity, scratches, dents or holes, paint runs, blisters, debris contamination). Its special design can effectively eliminate the dangers

t******m

Product quality is guaranteed because of the rigorous quality control process that effectively eliminates defects. There is no heat generated during liquid transfer

Message du produit

*Nom

Téléphone

*Courriel

*Contenu