high pressure air pump | Air booster pump

latest_products

Instructions de pompe à essai de pression manuelle

Pompe à essai de pression hydraulique / hydromique / hydrostatique

Cylindre à gaz Machine d'essai de mesure externe avec vestes d'eau

Pompe d'injection de réactif chimique pneumatique

Information produit
retour d'information

Product Details

Suncenter Fluid Control Equipment pursues perfection in every detail of hydro test pump, so as to show quality excellence.

Application Scope

Suncenter Fluid Control Equipment's booster pumps is widely applicable in the industry.Suncenter Fluid Control Equipment has many years of industrial experience and great production capability. We are able to provide customers with quality and efficient one-stop solutions according to different needs of customers.

Company Advantages
1. Suncenter air compressor booster pump is a newly designed with advanced international level.
2. With the extraordinary quality, it can attract the attention of most customers.
3. This product is currently very popular in the market and is being adopted by more and more people.
4. This product is widely used and has great market potential.

Air booster pump with max 40 bar pressure

Suncenter DGMA02 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 100mm, as a single action pump, all single acting pump head with exhaust cooling.

Air booster pump with max 40 bar pressure

◪ technical parameters
◪ Driven source: clean compressed air
◪ Air pressure control system
◪ Drive compressed air pressure: 1-8bar (recommended drive pressure<8bar)
◪ Boost Ratio:2:1
◪ Maximum flow rate : 580L/min
◪ Maximum air output pressure: 16bar.
◪ Applicable medium: clean air
◪ Air inlet minimum pressure: 1bar

Model	Pressure boost ratio	Max. air outlet pressure	Formula to calculate air outlet pressure PB	Connection: (NPT thread)	Max. flow rate (L/min)
DGMA02	2：1	16 bar	2XPL	3/8 / 3/8	580
DGVA02	2：1	16 bar	2XPL	3/8 / 3/8	1600
DGMA03	3：1	24 bar	3XPL	1/2 / 1/2	420
DGVA05	5：1	40 bar	5XPL	1/2 / 1/2	820

Suncenter DGVA02 Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 160mm, as a single action pump, all single acting pump head with exhaust cooling.

Air booster pump with max 40 bar pressure-2

◪ Technical parameters
◪ Driven source: clean compressed air
◪ Drive compressed air pressure: 1-8bar (recommended drive pressure<8bar)
◪ Boost Ratio:2:1
◪ Maximum flow rate : 1600L/min
◪ Maximum air output pressure: 16bar.
◪ Applicable medium: clean air
◪ Air inlet minimum pressure: 1bar

Suncenter DGMA03 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar.

Air booster pump with max 40 bar pressure-3

◪ Technical parameters
◪ Driven source: clean compressed air
◪ Air pressure control system
◪ Drive compressed air pressure: 1-8bar (recommended drive pressure<8bar)
◪ Boost Ratio:3:1
◪ Maximum flow rate : 420L/min
◪ Maximum air output pressure: 24bar.
◪ Applicable medium: clean air
◪ Air inlet minimum pressure: 1bar

Suncenter DGVA05 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 160mm, as a single action pump, all single acting pump head with exhaust cooling.

Air booster pump with max 40 bar pressure-4

◪ Technical parameters
◪ Driven source: clean compressed air
◪ Air pressure control system
◪ Drive compressed air pressure: 2-8bar (recommended drive pressure<8bar)
◪ Boost Ratio:5:1
◪ Maximum flow rate : 820L/min
◪ Maximum air output pressure: 40bar.
◪ Applicable medium: clean air
◪ Air inlet minimum pressure: 2bar

Characteristics :

It is using pure compressed air as the driving source, pneumatic booster pump for the pressure source, the use of pure air as the pressurized medium, the output air pressure and the pressure of the driving air source pressure. By adjusting the pressure of the driven air source, the corresponding pressure of the air pressure can be obtained. When the air pressure of the air pressure and the pressure of the booster is balanced, the pneumatic booster pump stops the pressurization, and the output air pressure is stable. Therefore it has the characteristics of explosion proof, energy saving, environmental protection, adjustable output pressure, small volume, light weight, simple operation, reliable performance and wide application range.

DGS-DGMA02 air pressure booster system

Air booster pump with max 40 bar pressure-5

◪ The system including: DGMA02 air booster pump,
◪ F.R.L combination (adjust driven air pressure+ filter+ lubricant)
◪ Air tank (20L/40L),Driven air switch, high pressure needle valve, high pressure gauge, reducing valve

DGS-DGVA02 air pressure booster system

Air booster pump with max 40 bar pressure-6

◪ The system including: DGVA02 air booster pump
◪ F.R.L combination (adjust driven air pressure+ filter+ lubricant)
◪ Air tank (20L/40L),Driven air switch, high pressure needle valve, high pressure gauge, reducing valve

Model	Pressure boost ratio	Max. air outlet pressure	Formula to calculate air outlet pressure PB	Connection: (NPT thread)	Max. flow rate (L/min)
DGS-DGMA02	2：1	16 bar	2XPL	3/8 / 3/8	580
DGS-DGVA02	2：1	16 bar	2XPL	3/8 / 3/8	1600
DGS-DGMA03	3：1	24 bar	3XPL	1/2 / 1/2	420
DGS-DGVA05	5：1	40 bar	5XPL	1/2 / 1/2	820

DGS-DGVA05 air pressure booster system

Air booster pump with max 40 bar pressure-7

◪ The system including: DGVA05 air booster pump
◪ F.R.L combination (adjust driven air pressure+ filter+ lubricant)
◪ Air tank (20L/40L),Driven air switch, high pressure needle valve, high pressure gauge, reducing valve

video

Company Features
1. Dongguan Suncenter Fluid Control Equipment Co., Ltd mainly deals with high pressure air pump with high quality and competitive rates.
2. With the society changing, Dongguan Suncenter Fluid Control Equipment Co., Ltd needs to update itself to be the leading booster air compressor supplier with qualified products.
3. air compressor booster pump is Dongguan Suncenter Fluid Control Equipment Co., Ltd original service theory, which fully shows its own superiority. Call! The essence in service creed of Dongguan Suncenter Fluid Control Equipment Co., Ltd is electric air compressor pump . Call! air pressure pump is Dongguan Suncenter Fluid Control Equipment Co., Ltd original service idea, which fully shows its own superiority. Call! Dongguan Suncenter Fluid Control Equipment Co., Ltd persists in the portable air compressor pump service philosophy. Call!

a******c

Suncenter booster air compressor has ensured quality. Its design has been tested over time to meet the challenges of the packaging and printing markets. Equipped with advanced machines, we can provide customized service for our products

v******n

The design and manufacture of Suncenter air compressor booster pump are done using templates provided by customers. They are strictly in accordance with size and printing requirements. The simulation of our products is good

k******p

The design of Suncenter air pressure pump takes a lot of effort. The design team devoted a lot of time to market research in the packaging and printing industries. At the same time. The simulation of our products is good

w******s

The manufacturing process of Suncenter portable air compressor pump has been greatly improved. Our professionals implement a complete print management system to improve product quality and minimize the impact on the environment. The simulation of our products is good

m******h

Suncenter air compressor booster pump from our company has excellent quality. Materials used for it are sourced from trustworthy suppliers and are of first-class. Prototype is made by CNC Milling,and the involved surface finishing including polishing, painting, the logo sticking

x******z

All the difference in texture and feature sets this product apart from the competition. The simulation of our products is good

Message du produit

*Nom

Téléphone

*Courriel

*Contenu