hydrostatic pressure test test

Enterprise Strength

Suncenter Fluid Control Equipment has advanced technical support and perfect after-sales service. Customers can select and purchase without worries.

Company Advantages
1. The design of Suncenter hydrostatic pressure test equipment is novel in the industry.
2. The exertion of hydrostatic pressure test equipment depends on the great performance of hydrostatic pressure test.
3. The product is indispensable to achieve sustainable development. It is effective in easing the burden on electricity supply plant and reducing pollution caused by fuel burning.
4. People will not easily to find there are hairs, surface fibers, or pilling on it. It is able to use for a long time without those above problems.

Introduction

test hydrostatic pressure test Suncenter-1

◪ The safety valve test bench is a new type of pressure test device developed by our company for reference to GB/T 12242-2005 (pressure release device and performance test specification), which is used to adjust and test the setting pressure of the safety valve.

Function and features

Safety valve test bench is used for various safety valve setting pressure adjustment, the whole set pressure detection, discharge pressure detection, back seat pressure testing, assessment of its pressure safety performance etc.. ,

◪ A. pressure range: 0-480 bar for option(gas pressure and water pressure)
◪ B. test medium: air, nitrogen, water;
◪ C. test valve diameter: DN15-DN400 for option
◪ D. pressure control accuracy: less than 1%F.S;
◪ E. pressure measurement accuracy: 0.4 pressure gauge (optional higher pressure level);

◪ F. Clamping way: hydraulic cylinder clamping;
◪ G. station interface type: screw and flange type
◪ H. clamping force output range: 0-50 tons;
◪ I. supply voltage: 50Hz -60Hz ,220V/380V for option
◪ J.Size：1500×1200×900mm(machine) +1500×800×800mm(clamping device)

Control panel

test hydrostatic pressure test Suncenter-2

Clamping seat

test hydrostatic pressure test Suncenter-3

Schematic diagram

test hydrostatic pressure test Suncenter-4

Instruction for software control part

test hydrostatic pressure test Suncenter-5

◪ Figure 1
◪ The first step: start the computer and double click the boot program, as shown in Figure 1.
◪ The second step: after the program, enter the main interface of the program.

test hydrostatic pressure test Suncenter-6

◪ In the main interface, select the appropriate sensor, and pay attention to the selection of the sensor not to exceed the 2/3. of the measuring process ,as shown in Figure3

test hydrostatic pressure test Suncenter-7

◪ In the main interface, choose water pressure test or air pressure test. As shown in Figure 4.

test hydrostatic pressure test Suncenter-8

◪ After selecting the pressure or water pressure test, click the menu bar test information to set the options. As shown in Figure 5.

test hydrostatic pressure test Suncenter-9

◪ Display the dialog box for the test information, as shown in Figure6

With printer,could print the testing report directly.

test hydrostatic pressure test Suncenter-10

test hydrostatic pressure test Suncenter-11

test hydrostatic pressure test Suncenter-12

◪ Safety valve test bench SVT40-DN400-CC computer control model

video

Company Features
1. Dongguan Suncenter Fluid Control Equipment Co., Ltd is professional in manufacturing and designing hydrostatic pressure test.
2. Our factory is equipped with modern production facilities. They provide us with full control of the quality of our products throughout the entire process.
3. Dongguan Suncenter Fluid Control Equipment Co., Ltd persists in the hydrostatic pressure test equipment service philosophy. Call now! Dongguan Suncenter Fluid Control Equipment Co., Ltd has established the service philosophy of safety valve test bench . Call now! The service concept of hydro pressure test pump has been established in Dongguan Suncenter Fluid Control Equipment Co., Ltd. Call now!

h******t

Suncenter hydro pressure test pump meets the safety management regulations and standards for electric devices. It is manufactured in line with the International Electrotechnical Commission (IEC) safety requirements. Hanway has upgraded to become a high-tech enterprise

i******n

Suncenter hydro pressure test pump will be scrutinized in an all-round way. Failure analysis will be conducted once it is finished, including fatigue failure, corrosion failure, toughness and brittle fracture, etc. Hanway follows the principle of customer first

j******l

Suncenter safety valve test bench meets the international standard for electrical appliances. No matter is the quality of electric parts or the housing and insulation material, they all made strictly according to regulations. Complete OEM service in Hanway is guaranteed to satisfy customers

r******h

The Incoming Quality Control (IQC) of Suncenter hydrostatic pressure test equipment is stringently carried out. It mainly involves measuring the precision of the electronic instrument and evaluating the quality of the components. Our staff will promptly give our response to customers

k******q

A wide range of tests for Suncenter hydrostatic pressure test has been conducted. It has been tested in some aspects such as circuit board, plugs, voltage, frequency, etc. Our products have good performance like waterproof which ensures the lifespan of the products

k******u

The company conducts standardized production in strict accordance with national standards. On the premise of strictly controlling product quality and meeting user needs, it saves production costs, improves economic benefits, and ensures that the hydrostatic pressure test produced are all high-quality and low-cost cost-effective products.

Message du produit

*Nom

Téléphone

*Courriel

*Contenu