high quality pressure booster pump system type for safety valve calibration

Gas booster pressure test bench

Suncenter - Air/Gas pressure test bench are compact and delicacy solution tailored to customer specific requirements with gas(air) boosters as well as all accessories to be fitted and installed in the frame or a closed cabinet.

To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator.

The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure.

Operating pressure up to 80 MPa, for higher pressure, pump with double driven heads is an ideal option.

high quality pressure booster pump system type for safety valve calibration-1

The hottest selling- Model C frame type cabinet picture

high quality pressure booster pump system type for safety valve calibration-2

◪ The standard gas booster pumps system including following parts:
◪ Air –driven gas booster pump (DGA/DGD/DGT three series for choosing)
◪ Stainless steel (carbon steel) material cabinet (Three models for choosing)
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge
◪ Gas inlet switch, Gas inlet pressure gauge
◪ Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’ special requirement.

high quality pressure booster pump system type for safety valve calibration-3

◪ DGS series air/gas pressure test bench with round chart recorder

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (ZG thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGA02	2：1	1.0	16	16	2-8 bar	2X PL	1/2 / 1/2	960 (at PA of 6 bar )
DGS-DGA05	5：1	0	40	40	2-8 bar	5XPL	1/2 / 1/2	680(at PA of 6 bar )
DGS-DGA10	10：1	3.5	80	80	2-8 bar	10XPL	3/8/ 3/8	210(at PA of 10 bar )
DGS-DGA25	25：1	7.0	200	200	2-8 bar	25XPL	1/4/ 1/4	120(at PA of 20 bar )
DGS-DGA40	40：1	10	320	320	2-8 bar	40XPL	1/4/ 1/4	200(at PA of 40 bar )
DGS-DGA60	60：1	20	480	480	2-8 bar	60XPL	1/4/ 1/4	180(at PA of 40 bar )
DGS-DGA100	100：1	25	800	800	2-8 bar	100XPL	1/4/ M14X1.5	136(at PA of 40 bar )
DGS-DGA130	130：1	35	800	1040	2-8 bar	130XPL	1/4/ M14X1.5	120(at PA of 40 bar )

Technical specification for DGS-DGD series

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (ZG thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGD10	10:1	3.5	80	80	2-8 bar	10XPL+ PA	3/8/3/8	410(at PA of 6 bar )
DGS-DGD25	25:1	10	200	200	2-8 bar	25XPL+ PA	1/4/1/4	396(at PA of 20 bar )
DGS-DGD40	40:1	15	320	320	2-8 bar	40XPL+ PA	1/4/1/4	320(at PA of 40 bar )
DGS-DGD60	60:1	25	480	480	2-8 bar	60XPL+ PA	1/4/1/4	215(at PA of 40 bar )
DGS-DGD100	100:1	35	800	800	2-8 bar	100XPL+ PA	1/4/M14*1.5	300(at PA of 60 bar )

Technical specification for DGS-DGT series

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (ZG thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGT25	25:1	0.1	10	200	2-8 bar	25XPL+3.5XPA	1/4/ 1/4	136(at PA of 8 bar )
DGS-DGT40	40:1	0.1	10	320	2-8 bar	40XPL+ 6XPA	1/4/1/4	124(at PA of 8 bar )
DGS-DGT10/60	10:1/60:1	0.1	10	480	2-8 bar	60XPL+6X PA	1/4/1/4	84(at PA of 8 bar )
DGS-DGT25/60	25:1/60:1	10	25	480	2-8 bar	60XPL+2.5XPA	1/4/1/4	80(at PA of 15 bar )
DGS-DGT100	100:1	0.1	10	800	2-8 bar	100XPL+10XPA	1/4/ M14*1.5	63(at PA of 8 bar )

video

m******e

The design of Suncenter pressure booster pump is very beautiful. The design process borrows state-of-the-art design software such as CAD software. Hanway has upgraded to become a high-tech enterprise

j******z

The design of Suncenter pressure booster pump is very practical. It is carefully designed according to the size, weight, and characteristics of the product to be packaged. All our products have passed the certificated qualification of ISO9001 and IATF16949

e******d

Suncenter hydraulic pump test bench has a good design. With the efforts of our in-house professional designers, it has quite attractive visual effects. Our staff will promptly give our response to customers

t******r

Suncenter hydraulic pump test bench has a green design. First-class materials that are recyclable and environmentally friendly are used for its production. Hanway has 180T,280T,400T,500T,1000T die casting machine

g******d

As for the design of Suncenter pressure booster pump, it is stylish. It adopts newer design concepts and follows the ongoing computer-assisted design trend. We will be responsible for providing the competitive high quality products with reasonable price

q******y

Furthermore, hydraulic pump test bench has such features as hydraulic pump test bench, so it is a more perfect for the field. Effective quality management system can ensure high quality and stability of products continuously

Message du produit

*Nom

Téléphone

*Courriel

*Contenu