easy to use air pressure pump bar from wholesale for pressurization

Air booster pump with max 40 bar pressure

Suncenter DGMA02 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 100mm, as a single action pump, all single acting pump head with exhaust cooling.

Air booster pump with max 40 bar pressure

easy to use air pressure pump bar from wholesale for pressurization-1

◪ technical parameters
◪ Driven source: clean compressed air
◪ Air pressure control system
◪ Drive compressed air pressure: 1-8bar (recommended drive pressure<8bar)
◪ Boost Ratio:2:1
◪ Maximum flow rate : 580L/min
◪ Maximum air output pressure: 16bar.
◪ Applicable medium: clean air
◪ Air inlet minimum pressure: 1bar

Model	Pressure boost ratio	Max. air outlet pressure	Formula to calculate air outlet pressure PB	Connection: (NPT thread)	Max. flow rate (L/min)
DGMA02	2：1	16 bar	2XPL	3/8 / 3/8	580
DGVA02	2：1	16 bar	2XPL	3/8 / 3/8	1600
DGMA03	3：1	24 bar	3XPL	1/2 / 1/2	420
DGVA05	5：1	40 bar	5XPL	1/2 / 1/2	820

Suncenter DGVA02 Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 160mm, as a single action pump, all single acting pump head with exhaust cooling.

easy to use air pressure pump bar from wholesale for pressurization-2

◪ Technical parameters
◪ Driven source: clean compressed air
◪ Drive compressed air pressure: 1-8bar (recommended drive pressure<8bar)
◪ Boost Ratio:2:1
◪ Maximum flow rate : 1600L/min
◪ Maximum air output pressure: 16bar.
◪ Applicable medium: clean air
◪ Air inlet minimum pressure: 1bar

Suncenter DGMA03 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar.

easy to use air pressure pump bar from wholesale for pressurization-3

◪ Technical parameters
◪ Driven source: clean compressed air
◪ Air pressure control system
◪ Drive compressed air pressure: 1-8bar (recommended drive pressure<8bar)
◪ Boost Ratio:3:1
◪ Maximum flow rate : 420L/min
◪ Maximum air output pressure: 24bar.
◪ Applicable medium: clean air
◪ Air inlet minimum pressure: 1bar

Suncenter DGVA05 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 160mm, as a single action pump, all single acting pump head with exhaust cooling.

easy to use air pressure pump bar from wholesale for pressurization-4

◪ Technical parameters
◪ Driven source: clean compressed air
◪ Air pressure control system
◪ Drive compressed air pressure: 2-8bar (recommended drive pressure<8bar)
◪ Boost Ratio:5:1
◪ Maximum flow rate : 820L/min
◪ Maximum air output pressure: 40bar.
◪ Applicable medium: clean air
◪ Air inlet minimum pressure: 2bar

Characteristics :

It is using pure compressed air as the driving source, pneumatic booster pump for the pressure source, the use of pure air as the pressurized medium, the output air pressure and the pressure of the driving air source pressure. By adjusting the pressure of the driven air source, the corresponding pressure of the air pressure can be obtained. When the air pressure of the air pressure and the pressure of the booster is balanced, the pneumatic booster pump stops the pressurization, and the output air pressure is stable. Therefore it has the characteristics of explosion proof, energy saving, environmental protection, adjustable output pressure, small volume, light weight, simple operation, reliable performance and wide application range.

DGS-DGMA02 air pressure booster system

easy to use air pressure pump bar from wholesale for pressurization-5

◪ The system including: DGMA02 air booster pump,
◪ F.R.L combination (adjust driven air pressure+ filter+ lubricant)
◪ Air tank (20L/40L),Driven air switch, high pressure needle valve, high pressure gauge, reducing valve

DGS-DGVA02 air pressure booster system

easy to use air pressure pump bar from wholesale for pressurization-6

◪ The system including: DGVA02 air booster pump
◪ F.R.L combination (adjust driven air pressure+ filter+ lubricant)
◪ Air tank (20L/40L),Driven air switch, high pressure needle valve, high pressure gauge, reducing valve

Model	Pressure boost ratio	Max. air outlet pressure	Formula to calculate air outlet pressure PB	Connection: (NPT thread)	Max. flow rate (L/min)
DGS-DGMA02	2：1	16 bar	2XPL	3/8 / 3/8	580
DGS-DGVA02	2：1	16 bar	2XPL	3/8 / 3/8	1600
DGS-DGMA03	3：1	24 bar	3XPL	1/2 / 1/2	420
DGS-DGVA05	5：1	40 bar	5XPL	1/2 / 1/2	820

DGS-DGVA05 air pressure booster system

easy to use air pressure pump bar from wholesale for pressurization-7

◪ The system including: DGVA05 air booster pump
◪ F.R.L combination (adjust driven air pressure+ filter+ lubricant)
◪ Air tank (20L/40L),Driven air switch, high pressure needle valve, high pressure gauge, reducing valve

video

m******p

Suncenter air pressure pump is made of high-quality timber. Its door rail, heart board, edge materials are all sourced in line with high quality, for example, any material contains insect attack, cupping, knot, or rupture will not be adopted. Lisson packaging tubes are served with various caps: flip top cap, screw cap, acrylic cap, etc

a******m

Suncenter air pressure booster meets a series of quality requirements stipulated in industry regulation. Its electrical property and the safety performance of the battery in different conditions are checked to be eligible and qualified. Lisson packaging tubes are served with various caps: flip top cap, screw cap, acrylic cap, etc

x******d

The workmanship of Suncenter air pressure pump mainly includes several aspects: mold filling, glaze spraying, sintering, cooling, and inspection which will be respectively conducted by professional technicians. There are more than 1,000 types of Lisson packaging tubes to satisfy diverse demands

i******y

The materials of Suncenter air pressure pump have been tested to meet the expected mechanical performance. Its strength, ductility, and toughness have been tested. 6 colors offset/screening printing of Lisson packaging tubes can be achieved at a time

v******t

Suncenter air pressure booster has been tested by the in-house testing department. For example, the non-destructive testing processes such as pressure, vacuum and leak testing have been strictly performed. Lisson packaging tubes are leak-proof

b******p

The product features minimal temperature variations. In the manufacturing process, it is installed with a substrate with excellent heat dissipation to control the change of temperatures. Lisson packaging tubes are soft and durable

Message du produit

*Nom

Téléphone

*Courriel

*Contenu